Fume Hood Blog
-

Fume Hood Duct Sizing: A Complete Guide to Diameter, Velocity and Material Selection
Fume hood duct sizing guide: calculate diameter from airflow and velocity, select materials (PP, PVC,…
-

How to Size a Fume Hood Exhaust Fan: Airflow, Static Pressure and Control
Size a fume hood exhaust fan in four steps: airflow at the operating sash, a…
-

Low-Flow vs Standard Fume Hoods: Containment, Energy and Controls
A low-flow fume hood is only a real saving when containment verifies as-used: five inputs…
-

FRP vs PP Fume Hoods: Construction, Chemical Resistance and Project Fit
FRP is usually a liner, PP is a welded cabinet — and the choice between…
-

Acid Digestion vs Perchloric Acid Fume Hood: Wash-Down?
Wash-down is a specifiable option on an acid digestion hood but integral to a dedicated…
-

Fume Hood Face Velocity Too High or Too Low: Causes and Corrective Checks
A face velocity reading that is too high or too low is a diagnostic snapshot,…
-

Explosion-Proof Fume Hood Requirements: What the Term Means
Explosion proof fume hood requirements: ignition-source control, room classification, four responsibility layers and the pre-order…
-

Perchloric Acid Fume Hood Requirements: Wash-Down, Ductwork and Materials
Perchloric acid fume hood requirements: trigger conditions by institution, wash-down coverage, dedicated exhaust, materials and…
-

Fume Hood Installation Requirements: A Complete Room-to-Acceptance Checklist
Fume hood installation requirements: room, clearance, utilities, ductwork, makeup air and on-site acceptance — the…
-

CAV vs VAV Fume Hoods: Airflow Control, Energy Use and Selection
CAV vs VAV fume hood control compared: what each system controls, when VAV really saves…







